Home > Products > Self Cleaning Filter Housing > Scraper Self Cleaning Filter Housings

Scraper Self Cleaning Filter Housings

Min. Order:
1 Piece/Pieces
Share:
  • Product Description
Overview
Packaging & Delivery
Selling Units:
Piece/Pieces


General Description

The automatic scraper type Self Cleaning Filter Housing is composed of motor reducer, stainless filter housing, filter screen, scraper combined cleaning system, PLC controller and electric sewage valve. It has the advantages of overcoming the traditional bag filter housig's shortcomings, such as small amount of pollution, easy blockage and frequent replacement of filter elements and Filter BagsThe raw material medium enters the filter through the feed port, from the inside to the outside, is filtered through the gap of the filter screen, the filtered raw material flows from top to bottom to the lower discharge port, and the impurities larger than the filter screen are intercepted and left behind. After running for a certain period of time, the filter gap is blocked by impurities, and when the pressure difference reaches the preset value, the PLC monitors the signal and sends out instructions. The geared motor drives the rotating scraper to automatically clean the dirt attached to the filter and maintain the filter. Filter function, the filter gap is unblocked; when the impurities at the bottom of the filter increase, as long as the bottom of the slag cutting blade is opened, the impurities will be discharged smoothly and the system pressure will remain normal. The scraper type self-cleaning filter has a reasonable scraper layout and an optimized scraping angle. Driven by the geared motor, the rotating scraper scrapes off the impurities in the filter gap in time, eliminating the trouble of dismantling and washing the filter, and keeping the raw materials unimpeded and filtered. The scraper system is a self-cleaning filter composed of fixed blades, PTFE scraper brush type combined cleaning and spring. The spring pressure compensation is reasonable and the wear of the filter screen is minimized.


Features

  • suitable for general and high viscosity liquid filtration
  • Permanent cleaning without stops
  • Minimal product loss
  • Applicable for all kinds of liquid filters from 35 µ up to 3 mm available
  • Maximum temperature up to 200 ºC
  • High differential pressure
  • Rugged two-part housing


Specifications

Type

FZ18

FZ25

FZ41

FZ61

FZ81

FZ118

Filter Area

0.18

0.25

0.41

0.61

0.81

1.18

Inlet Diameter

DN25

DN50

DN80

DN100

DN100

DN125

Outlet Diameter

DN25-DN80

Suitable for liquid

Water and Viscous material

Type of Control

Dual controlled by set fixed time and pressure difference

Micro

1um-1000um

Design of pressure

1.0Mpa (accept customized)

Design of temp

0-200℃

Cleaning pressure differential

50-100Kpa

Pressure differential gauge

Pressure transmitter

Blade Mat

PTFE

Shell sealing Mat

NBR, EPDM, VITON, Silicone rubber, FEP costing silicone rubber

Filter elements sealing Mat

NBR, EPDM, VITON, Silicone rubber, FEP costing silicone rubber

Drain Valve

Pneumatic Valve, single or double effect type, 304 316L

 




Applications

  • Polymers
  • citric acid
  • fermentation broths
  • Cosmetics
  • Gels
  • silicone solutions
  • Soaps
  • sorbitol


Product Categories : Self Cleaning Filter Housing

Email to this supplier
  • *Subject:
  • *To:
    Ms. Fiona.Xi
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Home > Products > Self Cleaning Filter Housing > Scraper Self Cleaning Filter Housings
Send Inquiry
*
*

Related Products List

Home

Product

Phone

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send