Parker Pro Bond Cartridge

High Flow Filter Cartridges-K Series

General Description FZ High Flow Filter Cartridges-K Series are made from depth fine PP or Glass fiber Materials，the filter has big diameter 6.3" to 6.5"/160 and 165mm.no inner core, single open, the inside to outside flow pattern ensure that all the particles will be intercepted at the inside of filter. Also can do...

Contact Now

PP/PE Double Composite Filter Cartridges

General Description The PP/PE Double Composite Filter Cartridges are made of PP and PE fiber to form three-dimensional (3D) bone. Composed of two fibers with different melting points, using unique curing technology, so that the two fibers are hot melt fixed, forming a hard and rigid matrix structure. This filter...

Contact Now

Phenolic Resin Filter Elements

• Min. Order: 100 Others

General Description Phenolic Resin Filter Cartridges structure is unique, divided into multi-level filtration, interception capacity and service life. The helical pre-filtration outer layer increases the strength of the Liquid Filter Elements and eliminates the residual debris problem caused by the poor bonding of the...

Contact Now

Phenolic -resin Filter Cartridges

General Description: In the filtration of viscous, soluble, high temperature fluid, the Phenolic -resin Filter Cartridges is the most efficient element to filter particles.It has a two-stage construction, the out-layer with surface spiral prefiltration can increase the filtration surface area, focus on large...

Contact Now

Polypropylene String Wound Cartridges

General Description FZ Filter Polypropylene wound string Filter cartridges are made of chosen quality PP Yarn materials by special winding mode.It is a kind of cartridge structured with the textile Yarn winded on the multi-hole frames.The cartridge precision can be controlled by the winding density and lowness, the...

Contact Now

PP Melt Blown Filter Cartridges

General Description The FZ Filter PP Melt Blown Filter Cartridges are made of 100% thermally bonded polypropylene, it is a kind of high intensity PP melt blown depth filtration cartridges , this type of filter cartridges is formed a tube shape through heating, melting, spinning and drawing, 100% Pure Polypropylene...

Contact Now

Polypropylene Microporous GradeⅡ Membrane

General Description Polypropylene Microporous Membrane is an important material for filter cartridges, the pore size of it depends the filtration rate of the filter cartridge. For Polypropylene Membrane GradeⅡ, the pore size are from 0.5-5μm. The membrane of this grade is newly developed and made from sub-micron melt...

Contact Now

PP Membrane Winding Filter Cartridge

• Min. Order: 100 others

General Description The PP Membrane Winding Filter Cartridge is a kind of customized type deep filtration cartridges, which is made of continuous multi-layer polypropylene membrane material winding.The unique winding structure can be made of a variety of polypropylene membrane material, such as 0.22 micron or 0.45...

Contact Now

PP Thermal Bonded Groove Filter Cartridges

General Description The PP Thermal Bonded Groove Filter elements are formed by high temperature sintering with clean and fine polypropylene, the groove design to be machined into the upstream surface, without tearing or melting the filter structure, providing more than double the effective surface area and high dirt...

Contact Now