Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Model No.: RO Membrane
Place Of Origin: China
Packaging: carton
Transportation: Ocean,Land,Express,Air,Others
Supply Ability: a million
Port: Shanghai,Ningbo,Shenzhen
Product introduction and application range
1. The FZ - BW series reverse osmosis membrane element is a polyamide composite membrane developed by Shanghai Feizuo Company for desalination of brackish water. It has the characteristics of low pressure operation, high water production and good desalination performance. It is suitable for desalination treatment of surface water, groundwater, tap water and other water sources with salt content less than 5000ppm. Among them, the 8-inch desalination membrane is mainly used in large and medium-sized chemical, pharmaceutical, food, power plants, and electronic plants. Process pure water, boilers Make-up water, etc., can also be used for desalination and purification of municipal water.
Model | Active Are a ft2(m2) | Feed Spacer Thickness(mil) | Permeate Flow Rate GPD(m3/d) | Stabilized Salt Rejection (%) | Minimum Salt Rejection (%) | |||
FZ-BW-8040-400 | 400 (37.2) | 32 | 10500 (39.7) | 99.50 | 99.30 | |||
FZ-BW-8040-420 | 420 (39) | 30 | 11000 (41.6) | 99.50 | 99.30 | |||
FZ-BW-8040-440 | 440 (41.0) | 28 | 11500 (43.5) | 99.50 | 99.30 | |||
FZ-BW-4040 | 85 (7.9) | 32 | 2400 (9.1) | 99.50 | 99.30 | |||
FZ-BW-4040P | 93 (8.6) | 28 | 2500 (9.5) | 99.50 | 99.30 | |||
FZ-BW-4040M | 103 (9.6) | 28 | 2600 (9.8) | 99.50 | 99.30 |
2. Element Dimension :
Model | Length | Diameter | Permeate Tube inner Diameter | Permeate Tube Extension Length | ||||
inch | mm | inch | mm | inch | mm | inch | mm | |
8040 | 40 | 1016 | 7.9 | 201 | 1.12 | 28.5 | / | / |
4040 | 40 | 1016 | 3.9 | 99 | 0.75 | 19.1 | 1.04 | 26.5 |
3. Test condition :
Test Pressure | 225psi ( 1.55Mpa ) | |||||||
Test Temperature | 25℃ | |||||||
Test Liquid concentration ( NaCI ) | 2000ppm | |||||||
Testing Liquid PH data | 7.5 | |||||||
Recovery rate of single RO membrane element | 15% |
4. Operative limits
Highest temperature of Inlet water | 113 F ( 45℃ ) | |||||||
Highest Operating Pressure | 600psi ( 5.14Mpa ) | |||||||
Maximum Pressure Drop of Single RO Membrane element | 15psi (0.1M Pa) | |||||||
Inlet water PH data range of continuous operating | 3 - 10. | |||||||
Inlet water PH data range of chemical cleaning | 2 - 12. | |||||||
Highest Inlet water flow | 16gpm ( 3.6m/h ) | |||||||
Biggest Inlet water SDI 15 | 5 | |||||||
Inlet water free chlorine concentration | < 0.1ppm |
Product Categories : RO Membrane
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.